Asus P5LD2 Deluxe P5LD2 Deluxe User's Manual for English Edition - Page 56
with a jumper cap. Remove the jumper caps only when you intend
View all Asus P5LD2 Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
14. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5LD2 DELUXE +5VSB_MB Chassis Signal GND ® CHASSIS (Default) P5LD2 DELUXE Chassis intrusion connector 15. IEEE 1394 connector (10-1 pin IE1394_2) This connector is for an additional IEEE 1394 port. Connect the IEEE 1394 module cable (orange) to this connector, then install the module to a slot opening at the back of the system chassis. P5LD2 DELUXE +12V TPB1+ GND TPA1+ GND +12V TPB1GND TPA1- ® 1 IE1394_2 P5LD2 DELUXE IEEE 1394 connector Never connect a U S B c a b l e to the IEEE 1394 connectors. Doing so will damage the motherboard! 2-32 Chapter 2: Hardware information