Asus P5LD2 P5LD2 User's Manual for English Edition - Page 124
Intel, RAID configurations, Installing Serial ATA hard disks
View all Asus P5LD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5.4.1 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 5.4.2 Intel® RAID configurations This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 (0+1), and Intel® Matrix Storage configurations for Serial ATA hard disks drives through the Intel® ICH7R Southbridge chip. Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can create a RAID set(s). To do this: 1. Enter the BIOS Setup during POST. 2. Go to the Main Menu, select IDE Configuration, then press . 3. Select the item C o n f i g u r e S A T A A s, then press to display the configuration options. 4. Select R A I D from the C o n f i g u r e S A T A A s item options, then press . 5. Select the item O n b o a r d S e r i a l - A T A B O O T R O M, press , then select E n a b l e d from the options. 6. Save your changes, then exit the BIOS Setup. Refer to the system or the motherboard user guide for details on entering and navigating through the BIOS Setup. 5-18 Chapter 5: Software support