Asus P5Q SE Plus User Manual - Page 73

Ai Transaction Booster [Auto], CPU Voltage [Auto], FSB Termination Voltage [Auto], Memory Voltage [ - cpu compatibility

Get Asus P5Q SE Plus - Motherboard - ATX PDF manuals and user guides
UPC - 610839166213
View all Asus P5Q SE Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

2.4.9 Ai Transaction Booster [Auto] Allows you to set the system performance. Configuration options: [Auto] [Manual] The following two sub-items appear only when you set the Ai Transaction Booster item to [Manual]. Common Performance Level [05] Set this item to a higher level for better compatibility or a lower level for better performance. Use the and keys to adjust the value. The values range from 1 to 31. Pull-In of CHA/B PH1/2/3/4 [Disabled] Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase 1 to 4. The number of phases is determined by DRAM frequency and FSB strap. Configuration options: [Disabled] [Enabled] The following ten (10) items on the next page are adjusted by typing the desired values using the numeric keypad and press the key. You can also use the and keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key. 2.4.10 CPU Voltage [Auto] Allows you to set the CPU VCore voltage. The values range from 0.85000V to 1.50000V with a 0.00625V interval. Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high VCore voltage may damage the CPU permanently, and setting a low VCore voltage may make the system unstable. 2.4.11 FSB Termination Voltage [Auto] Allows you to set the front side bus termination voltage. The values range from 1.20V* to 1.50V with a 0.10V interval. The minimum value of this item becomes 1.10V when a 45nm CPU is installed. 2.4.12 Memory Voltage [Auto] Allows you to set the Memory voltage. The values range from 1.80V to 2.30V with a 0.10V interval. 2.4.13 North Bridge Voltage [Auto] Allows you to set the North Bridge voltage. The values range from 1.10V to 1.40V* with a 0.10V interval. ASUS P5Q SE Plus 2-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
ASUS P5Q SE Plus
2-21
2.4.9
Ai Transaction Booster [Auto]
Allows you to set the system performance. Configuration options: [Auto] [Manual]
The following two sub-items appear only when you set the
Ai Transaction
Booster
item to [Manual].
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value. The values range
from 1 to 31.
Pull-In of CHA/B PH1/2/3/4 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,
Phase 1 to 4. The number of phases is determined by DRAM frequency and
FSB strap. Configuration options: [Disabled] [Enabled]
The following ten (10) items on the next page are adjusted by typing the desired
values using the numeric keypad and press the <Enter> key. You can also use
the <+> and <-> keys to adjust the value. To restore the default setting, type
[auto] using the keyboard and press the <Enter> key.
2.4.10
CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
1.50000V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
2.4.11
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from
1.20V* to 1.50V with a 0.10V interval.
The minimum value of this item becomes 1.10V when a 45nm CPU is installed.
2.4.12
Memory Voltage [Auto]
Allows you to set the Memory voltage. The values range from 1.80V to 2.30V with
a 0.10V interval.
2.4.13
North Bridge Voltage [Auto]
Allows you to set the North Bridge voltage. The values range from 1.10V to 1.40V*
with a 0.10V interval.