Asus P5RD1-VM P5RD1-VM user's manual - Page 45
with a jumper cap. Remove the jumper caps only when you intend
View all Asus P5RD1-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
10. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC'97 audio standard. AAFP Azalia Legacy AC'97 compliant definition compliant definition AGND +5VA BLINE_OUT_R BLINE_OUT_L GND PRESENCE# SENSE1_RETUR SENSE2_RETUR P5RD1-VM MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L ® P5RD1-VM Analog front panel connector It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. 11. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5RD1-VM CHASSIS GND Chassis Signal (Default) +5VSB_MB ® P5RD1-VM Chassis intrusion connector ASUS P5RD1-VM 1-33