Asus P5RD2-VM Motherboard Installation Guide - Page 70
Advanced NB
View all Asus P5RD2-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Advanced NB If you select the option of Advanced NB, the following options will appearred. Configure DRAM Timing by SPD DRAM CAS Select DRAM tRP Select DRAM tRCD Select DRAM tRAS Select Refresh Rate Select [Enabled] [3.5 Clocks] [4.0 Clocks] [4.0 Clocks] [12.0 Clocks] [7.8 us] Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is Disabled. Configuration options: [Enabled] [Disabled] The following items will appears when you set the Configure DRAM Timing by SPD to [Disabled]. DRAM CAS Select [3.5 Clocks] Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [1.0 Clocks] [1.5 Clocks] [2.0 Clocks] [2.5 Clocks] [3.0 Clocks] [3.5 Clocks] DRAM tRP Select [4.0 Clocks] Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks] [5.0 Clocks] DRAM tRCD Select [4.0 Clocks] Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks] DRAM tRAS Select [12 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [2.0 Clock] [3.0 Clocks] ~ [15.0 Clocks] Redresh Rate Select [7.8 us] Configuration options: [15.625 us] [3.9 us] [7.8 us] [31.3 us] [62.5 us] [125 us] 2-24 Chapter 2: BIOS setup