Asus P5SD2-VM User Manual - Page 30
Installing a DIMM, Removing a DIMM
UPC - 610839154845
View all Asus P5SD2-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
1.7.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 1. Unlock a DDR2 DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 1 2 DDR2 DIMM notch 1 Unlocked retaining clip A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. 3. Firmly insert the DIMM into the 3 socket until the retaining clips snap back in place and the DIMM is properly seated. Locked Retaining Clip 1.7.4 Removing a DIMM Follow these steps to remove a DIMM. 2 1. Simultaneously press the retaining clips outward to unlock the DIMM. 1 DDR2 DIMM notch Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. 2. Remove the DIMM from the socket. 1-18 Chapter 1: Product introduction