Asus P5W64 WS Motherboard Installation Guide - Page 62
P5W64 WS PRO Chassis intrusion connector
View all Asus P5W64 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
9 . Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS (Default) P5W64 WS PRO Chassis intrusion connector ® P5W64 WS PRO +5VSB_MB Chassis Signal GND 2-36 Chapter 2: Hardware information
2-36
2-36
2-36
2-36
2-36
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
9.
9.
9.
9.
9.
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
P5W64 WS PRO
P5W64 WS PRO Chassis intrusion connector
CHASSIS
+5VSB_MB
Chassis Signal
GND
(Default)