Asus P6-P7H55E User Manual - Page 53
Initiate Graphic Adapter [iGPU], iGPU Graphics Mode Select [Enabled, 32MB], Memory Remap Feature [
View all Asus P6-P7H55E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled] The following item appears only when you are using Clarkdale CPU. Initiate Graphic Adapter [iGPU] Allows you to select the graphics controller as the primary boot device. Configuration options: [iGPU] iGPU Graphics Mode Select [Enabled, 32MB] Allows you to select the amount of system memory used by the Internal graphics device. Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB] DVMT Memory [256MB] Allows you to set the DVMT memory. Configuration options: [128MB] [256MB] [Maximum] 4-16 Chapter 4: BIOS setup
4-16
Chapter 4: BIOS setup
The following item appears only when you are using Clarkdale CPU.
Initiate Graphic Adapter [iGPU]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [iGPU]
iGPU Graphics Mode Select [Enabled, 32MB]
Allows you to select the amount of system memory used by the Internal graphics
device. Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB]
[Enabled, 128MB]
DVMT Memory [256MB]
Allows you to set the DVMT memory.
Configuration options: [128MB] [256MB] [Maximum]
Memory Remap Feature [Enabled]
Allows you to enable or disable the
remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]