Asus P6T WS Professional User Guide - Page 171
SAS RAID configurations
UPC - 610839167791
View all Asus P6T WS Professional manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
4.4.4 Marvell® SAS RAID configurations The Marvell® 88SE6320 SAS controller allows you to configure RAID 0 and 1 set on the SAS hard disk drives. Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can create a RAID set. To do this: 1. Install two internal SAS hard disk drives to the SAS connectors labeled SAS1/2. 2. Boot up your computer, and press during POST to enter the BIOS setup. 3. In the Advanced menu, go to Onboard Devices Configuration, and enable both Marvell SAS and SAS Boot ROM. 4. Press to save the changes and exit. BIOS SETUP UTILITY Advanced Configure Super IO Chipset High Definition Audio Front Panel Type Marvell Storage Controller Marvell Storage Boot Rom Marvell SAS SAS Boot ROM Marvell LAN1 Marvell LAN2 LAN Boot ROM Onboard 1394 Controller [Enabled] [HD Audio] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] Enable or Disable High Definition Audio Controller Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen. ASUS P6T WS Professional 4-57