Asus P6TD User Manual - Page 88
DRAM Frequency [Auto], UCLK Frequency [Auto], QPI Link Data Rate [Auto], DRAM Timing Control [Auto]
UPC - 610839172573
View all Asus P6TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3.4.5 DRAM Frequency [Auto] Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] The DRAM Frequency configuration options vary with the BCLK Frequency item settings. Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. 3.4.6 UCLK Frequency [Auto] Allows you to set the Uncore Clock Ratio. The value must be at least twice as DRAM frequency. The valid value ranges differently according to your CPU model. 3.4.7 QPI Link Data Rate [Auto] Allows you to set the data rate of the QuickPath Interconnect (QPI). Configuration options: [Auto] [4800MT/s] [5866MT/s] [6400MT/s] 3.4.8. DRAM Timing Control [Auto] The items in this menu allow you to set the DRAM timing control features. The configuration options for some of the following items vary �d�e�p�e�n��d�in��g�o��n�t�h�e� DIMMs you install on the motherboard. 1st Information: 6-6-6-15-4-36-6-5-16-0 The values vary depending on your settings of the following sub-items: DRAM CAS# Latency [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [10 DRAM Clock] [11 DRAM Clock] DRAM RAS# to CAS# Delay [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [9 DRAM Clock] [10 DRAM Clock] DRAM RAS# PRE Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [9 DRAM Clock] [10 DRAM Clock] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [30 DRAM Clock] [31 DRAM Clock] DRAM RAS# to RAS# Delay [Auto] Configuration options: [Auto] [1 DRAM Clock] - [7 DRAM Clock] 3-16 Chapter 3: BIOS setup