Asus P8P67 EVO User Manual - Page 41
Marvell, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_E1/E2 [navy blue], Marvell Storage Controller
View all Asus P8P67 EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Marvell® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. • The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is not supported. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using NCQ, set the Marvell Storage Controller item in the BIOS to [AHCI Mode]. Refer to section 3.5.6 Onboard Devices Configuration for details. Chapter 2 ASUS P8P67 EVO 2-23
ASUS P8P67 EVO
2-23
Chapter 2
3.
Marvell
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is
not supported.
•
You must install Windows
®
XP Service Pack 3 or later versions before using Serial ATA
hard disk drives.
•
When using NCQ, set the
Marvell Storage Controller
item in the BIOS to [AHCI
Mode]. Refer to section
3.5.6 Onboard Devices Configuration
for details.