Asus P8Q67-M DO TPM User Manual - Page 28
Speaker Out Connector
View all Asus P8Q67-M DO TPM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
+5VSB_MB Chassis Signal GND 12. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS P8Q67-M DO/USB3 P8Q67-M DO/USB3 Chassis intrusion connector 13. Speaker connector (4-pin SPEAKER) The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER P8Q67-M DO/USB3 PIN 1 P8Q67-M DO/USB3 Speaker Out Connector +5V GND GND Speaker Out 1-18 ASUS P8Q67-M DO Series