Asus P8Z77-V LE V3 P8Z77-V LE V3 User's Manual - Page 41
Internal connectors, P8Z77-V LE SATA 6.0Gb/s connectors
View all Asus P8Z77-V LE V3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2.2.8 Internal connectors 1. Intel® Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z77 chipset. GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND Chapter 2 P8Z77-V LE SATA6G_2 SATA6G_1 P8Z77-V LE SATA 6.0Gb/s connectors • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.3 SATA Configuration for details. • Before creating a RAID set, refer to section 4.5 RAID Configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.3 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. 2. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM1 PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI P8Z77-V LE P8Z77-V LE Serial port (COM1) connector The serial port bracket (COM1) module is purchased separately. ASUS P8Z77-V LE 2-21