Asus PCE-N10 User Manual - Page 21
Wireless Network Key WEP, Key Format, Manual Assignment WPA and WPA2, Key Length, Select one as your
View all Asus PCE-N10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PCE-N10 WLAN Card User Manual Wireless Network Key (WEP) - This option becomes configurable when you select WEP in the Data encryption field. 64-bit WEP key uses 5 ASCII characters (10 hexadecimal digits). 128-bit WEP key uses 13 ASCII (26 hexadecimal digits). Key Format - Allows you to select the key format. Manual Assignment (WPA and WPA2)- Allows you to assign WEP Keys manually. Key Length - Allows you to select the key length. For 64bits encryption, each key consists of 10 hexadecimal digits or 5 ASCII characters. For 128bits encryption, each key consists of 26 hexadecimal digits or 13 ASCII characters. Select one as your Default Key - Allows you to select one of the four WEP Keys as the default key. Config - Advanced This Advanced page is intended for experienced users to set up additional parameters for the WLAN card. We recommend that you keep the default values. RTS Threshold (0-2347) - The Request to Send/Clear to Send (RTS/CTS) function is used to minimize collisions among wireless stations. When RTS/CTS is enabled, the router refrains from sending a data frame until another RTS/CTS handshake is completed. Enable RTS/CTS by setting a specific packet size threshold. The default value (2347) is recommended. Fragmentation Threshold (256-2346) - Fragmentation is used to divide 802.11 frames into smaller pieces (fragments) that are sent separately to the destination. Enable fragmentation by setting a specific packet size threshold. If there is an excessive number of collisions on the WLAN, experiment with different fragmentation values to increase the reliability of frame transmissions. The default value (2346) is recommended for normal use. Preamble Mode - Select the preamble mode. The default value is Auto. 18 ASUS WLAN Card