Asus PR-DLS PR-DLS User Manual

Asus PR-DLS Manual

Get Asus PR-DLS PDF manuals and user guides View all Asus PR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Asus PR-DLS manual content summary:

  • Asus PR-DLS | PR-DLS User Manual - Page 1
    Motherboard PR-DLS User Guide
  • Asus PR-DLS | PR-DLS User Manual - Page 2
    express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL
  • Asus PR-DLS | PR-DLS User Manual - Page 3
    this guide ix Where to find more information ix ASUS contact information x PR-DLS specifications summary xi Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 Value-added solutions 1-4 1.4 Motherboard overview
  • Asus PR-DLS | PR-DLS User Manual - Page 4
    Safeguards Contents 2.6 Expansion slots 2-11 2.6.1 Installing an expansion card 2-11 2.6.2 Configuring an expansion card 2-11 2.6.3 PCI slots 2-13 2.7 Switches and jumpers 2-14 2.7.1 Switches 2-14 2.7.2 Jumpers 2-14 2.8 Connectors 2-17 Chapter 3: Powering up 3.1 Starting up for the first
  • Asus PR-DLS | PR-DLS User Manual - Page 5
    4.0 5-1 5.1.1 LSI® SCSI Driver Installation 5-1 5.1.2 Intel® 82551QM/82544GC LAN Driver Installation . 5-4 5.1.3 ATI® Rage XL Display Driver Installation 5-8 5.2 Microsoft® Windows® 2000 Server 5-9 5.2.1 LSI® SCSI Driver Installation 5-9 5.2.2 Intel® 82551QM/82544GC LAN Driver Installation 5-12
  • Asus PR-DLS | PR-DLS User Manual - Page 6
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus PR-DLS | PR-DLS User Manual - Page 7
    add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. • Seek professional assistance before a stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii
  • Asus PR-DLS | PR-DLS User Manual - Page 8
    PR-DLS motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the PR-DLS motherboard. It includes brief descriptions of the special attributes of the motherboard and the new technology it supports
  • Asus PR-DLS | PR-DLS User Manual - Page 9
    in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS
  • Asus PR-DLS | PR-DLS User Manual - Page 10
    Fax: +1-510-608-4555 General Email: [email protected] Technical Support Support Fax: +1-510-608-4555 General Support: +1-502-995-0883 Notebook Support: +1-877-918-ASUS (2787) Web Site: www.asus.com Support Email: [email protected] ASUS COMPUTER GmbH (Europe) Address: Harkortstr. 25, 40880
  • Asus PR-DLS | PR-DLS User Manual - Page 11
    PR-DLS specifications summary CPU Chipsets Front Side Bus (FSB) Memory Onboard LAN Onboard SCSI Onboard VGA Expansion slots Rear panel I/O Internal connectors Support for Intel® Xeon™ processor On-die 512KB L2 cache RCC Grand Champion LE Server 2.0 (GCLE) RCC Champion South Bridge 5.0 (CSB5) RCC
  • Asus PR-DLS | PR-DLS User Manual - Page 12
    PR-DLS specifications summary BIOS features Form Factor Support CD contents 4Mb Flash ROM, Award BIOS with ACPI, DMI, Green, PnP features, and Enhanced Server BIOS features Extended ATX form factor: 12 in x 13 in (30.5 cm x 33 cm) Device drivers Management software Utilities Contact information *
  • Asus PR-DLS | PR-DLS User Manual - Page 13
    Chapter 1 This chapter describes the features of the PR-DLS motherboard. It includes brief explanations of the special attributes of the motherboard and the new technology it supports. Product introduction
  • Asus PR-DLS | PR-DLS User Manual - Page 14
    Chapter summary 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.4 Motherboard overview 1-6 ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 15
    //33 IDE drives 68-pin LVD SCSI cable for Ultra 160/320 SCSI devices Ribbon cable for a 3.5-inch floppy drive Bag of extra jumper caps PR-DLS User Guide LSI SCSI Controller User's Manual If any of the above items is damaged or missing, contact your retailer. ASUS PR-DLS motherboard user guide 1-1
  • Asus PR-DLS | PR-DLS User Manual - Page 16
    execution trace cache to offer a significant increase in performance. See page 2-4 for more information. DDR memory support Employing the Double Data Rate (DDR) memory technology, the PR-DLS motherboard supports up to 12GB of system memory using PC2100/1600 registered ECC DDR DIMMs. The ultra-fast
  • Asus PR-DLS | PR-DLS User Manual - Page 17
    with the Intel® 82551QM Fast Ethernet controller and the Intel® 82544GC Gigabit Ethernet controller to support the latest LAN technologies. Onboard VGA The ATI Rage-XL PCI-based VGA controller integrates an 8MB display SDRAM to provide onboard video solution. ASUS PR-DLS motherboard user guide 1-3
  • Asus PR-DLS | PR-DLS User Manual - Page 18
    -Up features. Server management The motherboard comes with an ASMC connector that supports the optional ASMC-HE/ME/LE card to comply with server reliability, availability, and serviceability requirements. Remote management response via remote diagnostics and troubleshooting still works even when the
  • Asus PR-DLS | PR-DLS User Manual - Page 19
    detection The motherboard supports chassis intrusion monitoring through the ASUS ASIC. A drivers, and installation procedures for Windows NT/2000/XP. Color-coded connectors and descriptive icons make identification easy as required by the PC '99 specification. ASUS PR-DLS motherboard user guide
  • Asus PR-DLS | PR-DLS User Manual - Page 20
    motherboard specifications will also help you avoid mistakes that may damage the board and its components. 1.4.1 Major components The following are the major components of the PR-DLS motherboard 10. Ultra-160/320 SCSI connectors 11. LSI® SCSI controller 12. Flash ROM 13. ASUS ASIC 14. ServerWorks® 64
  • Asus PR-DLS | PR-DLS User Manual - Page 21
    12 34 5 6 7 20 19 18 17 16 21 8 9 15 14 13 12 11 10 22 27 26 25 24 ASUS PR-DLS motherboard user guide 23 1-7
  • Asus PR-DLS | PR-DLS User Manual - Page 22
    multiple PCI-X interfaces that allows large, efficient, and flexible I/O configurations. The CIOB-X2 supports dual 64-bit PCI-X I/O buses that comply with PCI 2.2 specification. There are two CIOB-X2 on the motherboard. 3 24/20-pin ATX power connector. This power connector is for an ATX power
  • Asus PR-DLS | PR-DLS User Manual - Page 23
    LPC super I/O controller. This Low Pin Count (LPC) interface provides the commonly used Super I/O functionality. The chipset supports UART compatible serial ports, one parallel port with EPP and ECP capabilities, a floppy drive, and PS/2 keyboard and mouse. ASUS PR-DLS motherboard user guide 1-9
  • Asus PR-DLS | PR-DLS User Manual - Page 24
    10Mbps data rates. The 82544GC is optimized for LAN on Motherboard designs (LOM), enterprise networking, and Internet appliances that use PCI or PCI-X bus. The controller provides a 32/64-bit, 33/66MHz interface to the PCI bus that supports PCI Specification Rev. 2.2, and to the PCI-X extension to
  • Asus PR-DLS | PR-DLS User Manual - Page 25
    Chapter 2 This chapter describes the hardware setup procedures that you have to perform when installing system components. It includes details on the switches, jumpers, and connectors on the motherboard. Hardware information
  • Asus PR-DLS | PR-DLS User Manual - Page 26
    Chapter summary 2.1 Motherboard installation 2-1 2.2 Motherboard layout 2-2 2.3 Before you proceed 2-3 2.4 Central Processing Unit (CPU 2-4 2.5 System memory 2-8 2.6 Expansion slots 2-11 2.7 Switches and jumpers 2-14 2.8 Connectors 2-17 ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 27
    indicated in the image below. 2.1.2 Screw holes Place 11 screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so may damage the motherboard. Place this side towards the rear of the chassis ASUS PR-DLS motherboard user guide 2-1
  • Asus PR-DLS | PR-DLS User Manual - Page 28
    604 SYSFAN2 PARALLEL PORT mPGA 604 VGA RJ-45 (LAN-2) RJ-45 (LAN-1) Intel 82544GC Gigabit Ethernet ServerWorks ® CIOB-X2 I/O Bridge ServerWorks ® CMIC-LE North Bridge CLKSW Super I/O Intel 82551QM Fast Ethernet VGA RAM ATI RAGE XL VGA Controller PR-DLS PCI-X1 (64-bit, 133MHz 3V) LAN_EN
  • Asus PR-DLS | PR-DLS User Manual - Page 29
    Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before cause severe damage to the motherboard, peripherals, and/or components. ASUS PR-DLS motherboard user guide 2-3
  • Asus PR-DLS | PR-DLS User Manual - Page 30
    , faster execution of integer instructions, and data transfer rate of up to 3.2GB/s. Prestonia Gold Arrow PR-DLS PR-DLS Socket 604 Note in the illustration that the CPU has a gold triangular mark on one corner. This mark indicates the processor Pin 1 that should match a specific corner of the CPU
  • Asus PR-DLS | PR-DLS User Manual - Page 31
    socket 2 first. Follow these steps to install a CPU. 1. Locate the 604-pin ZIF sockets on the motherboard. Unlock the socket by pressing the lever sideways, then lift it up to at least 115° angle. Make sure on the side tab to indicate that it is locked. ASUS PR-DLS motherboard user guide 2-5
  • Asus PR-DLS | PR-DLS User Manual - Page 32
    one end of the retention bracket into the protruding tab on the corner of the plastic retention base. (The retention base comes installed with the motherboard.) 2-6 Chapter 2: Hardware information
  • Asus PR-DLS | PR-DLS User Manual - Page 33
    3. Use a small flat screw driver to attach the other end of motherboard labeled CPUFAN1 (for the CPU on socket 1) and CPUFAN2 (for the CPU on socket 2). Don't forget to connect the CPU fan cable. Hardware monitoring problems may occur if you fail to plug the cable. ASUS PR-DLS motherboard user guide
  • Asus PR-DLS | PR-DLS User Manual - Page 34
    The motherboard comes with six Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 12GB system memory using 184-pin registered PC2100/1600 DIMMs with Serial Presence Detect (SPD) and Error Check and Correction (ECC). 104 Pins 80 Pins PR-DLS PR-DLS 184
  • Asus PR-DLS | PR-DLS User Manual - Page 35
    128MB, 256MB, 512MB, 1GB, 2GB x1 DDRC2 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 Total System Memory (Max. 12GB) = The system chipset only supports PC2100/1600 registered ECC DIMMs. Make sure to use only the specified DIMM types for stable system operation. ASUS PR-DLS motherboard user guide 2-9
  • Asus PR-DLS | PR-DLS User Manual - Page 36
    components. Failure to do so may cause severe damage to both the motherboard and the components. Follow these steps to install a DIMM. 1. Unlock outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
  • Asus PR-DLS | PR-DLS User Manual - Page 37
    expansion cards. The following subsections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. on the next page. 3. Install the software drivers for the expansion card. ASUS PR-DLS motherboard user guide 2-11
  • Asus PR-DLS | PR-DLS User Manual - Page 38
    IRQ assignments for this motherboard PCI INTA PCI slot 1 10 Onboard 82551QM controller 2 Onboard 82544GC controller 3 Onboard SCSI controller 6 Onboard VGA controller 30 PCI INTB 12 15 using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not
  • Asus PR-DLS | PR-DLS User Manual - Page 39
    (Zero Channel RAID) card PCI slot (PCI6) PCI6 is a 32-bit/33MHz 5V PCI slot with a Low Pin Count (LPC) signal connector to accommodate the ASUS Server Management Card. This slot has the same specifications regardless of the onboard SCSI controller. ASUS PR-DLS motherboard user guide 2-13
  • Asus PR-DLS | PR-DLS User Manual - Page 40
    figure shows the location and default settings of the DIP switches on the motherboard. Keep the default settings for stable system operation. PR-DLS PR-DLS DIP Switches CLKSW ON OFF ON 12345 (Default) 2.7.2 Jumpers 1. SCSI setting (2-pin SCSI_EN) This jumper allows you to enable or disable the
  • Asus PR-DLS | PR-DLS User Manual - Page 41
    supports up to 1000MBps data rates, and is optimized for LAN On Motherboard (LOM) designs, enterprise networking, and devices that use PCI or PCI-X bus. Set to pins 2-3 to disable the controller. PR-DLS PR-DLS 1G LAN Setting 1G LAN_EN Enable (Default) Disable ASUS PR-DLS motherboard user guide
  • Asus PR-DLS | PR-DLS User Manual - Page 42
    during the boot process and enter BIOS setup to re-enter data. Short solder points to Clear CMOS CR2032 3V Lithium Cell CMOS Power R452 ASUS ASIC with Hardware Monitor PR-DLS PR-DLS Clear RTC RAM 2-16 Chapter 2: Hardware information
  • Asus PR-DLS | PR-DLS User Manual - Page 43
    drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. back of the system chassis. PIN 1 PR-DLS PR-DLS Serial COM2 Connector ASUS PR-DLS motherboard user guide 2-17
  • Asus PR-DLS | PR-DLS User Manual - Page 44
    PR-DLS IDE Connectors Primary IDE Connector PIN 1 Secondary IDE Connector PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. For UltraDMA/100/66 IDE devices, use an 80-conductor IDE cable. The UltraDMA/66 cable included in the motherboard package also supports
  • Asus PR-DLS | PR-DLS User Manual - Page 45
    a specific implementation of an I2C bus, a multi-device bus that allows multiple chips to connect to the same bus and enable each one to act as a master by initiating data transfer. PR-DLS PR-DLS SMBus Connectors +5V SMBDATA Ground SMBCLK FLOATING SMB 1 ASUS PR-DLS motherboard user guide 2-19
  • Asus PR-DLS | PR-DLS User Manual - Page 46
    completely fit. In addition to the 24/20-pin ATXPWR connector, this motherboard requires that you connect the 8-pin ATX +12V power plug to provide Supply with 20-pin Power Connector GND GND GND GND PR-DLS PR-DLS ATX Power Connector 8-pin CON12V 12V 12V 12V 12V 4-pin 2-20
  • Asus PR-DLS | PR-DLS User Manual - Page 47
    , a USB header is available for additional USB ports. The USB header complies with USB 1.1 specification that supports up to 12 Mbps connection speed. PR-DLS PR-DLS USB Header USB2 6 USB Power USBP3- USBP3+ GND 10 1 USB Power USBP2- USBP2+ GND NC 5 ASUS PR-DLS motherboard user guide 2-21
  • Asus PR-DLS | PR-DLS User Manual - Page 48
    The card supports RAID levels 0, 1, 5, multilevel 0/1 and 0/5, cache memory modules with ECC, and predictive caching capability. PR-DLS PR-DLS Zero slot on the motherboard has a Low Pin Count (LPC) signal connector to accommodate the ASMC card. PR-DLS PR-DLS ERMC Connector 2-22 Chapter
  • Asus PR-DLS | PR-DLS User Manual - Page 49
    . The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON Ground PR-DLS PR-DLS Wake-On-LAN Connector PME +5 Volt Standby ASUS PR-DLS motherboard user guide 2-23
  • Asus PR-DLS | PR-DLS User Manual - Page 50
    channel can support a maximum of 15 devices as specified by Ultra160/320 standards. SCSI-A 1 35 68-Pin Ultra160/ Ultra2-Wide SCSI Connector SCSI-B 68-Pin Ultra160/ Ultra2-Wide SCSI Connector 34 PR-DLS 68 PR-DLS Onboard SCSI Connectors 1 35 34 68 SCSI Connection Notes This motherboard has
  • Asus PR-DLS | PR-DLS User Manual - Page 51
    system front panel functions. Keyboard Lock Speaker Power LED Connector +5 V PLED Keylock Ground +5V Ground Ground Speaker 11 20 1 10 +5 V MLED PWR Ground Reset Ground PR-DLS PR-DLS System Panel Connectors Message LED Reset SW ATX Power Switch* ASUS PR-DLS motherboard user guide 2-25
  • Asus PR-DLS | PR-DLS User Manual - Page 52
    there is no incoming data signal. The LED blinks when data is received. The system message LED feature requires an ACPI OS and driver support. • System Warning Speaker Lead (4-pin SPEAKER) This 4-pin connector is for a chassis-mounted speaker. • ATX Power Switch / Soft-Off Switch Lead (2-pin PWR
  • Asus PR-DLS | PR-DLS User Manual - Page 53
    Chapter 3 This chapter describes the power up sequence and gives information on the BIOS beep codes. Powering up
  • Asus PR-DLS | PR-DLS User Manual - Page 54
    Chapter summary 3.1 Starting up for the first time 3-1 3.2 Powering off the computer 3-2 ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 55
    with a surge protector. 5. Turn on the devices in the following order: a. Monitor b. External SCSI devices (starting with the last device on the chain) c. System power (if you are using an to enter BIOS Setup. Follow the instructions in Chapter 4. ASUS PR-DLS motherboard user guide 3-1
  • Asus PR-DLS | PR-DLS User Manual - Page 56
    the power. For ATX power supplies, you can press the ATX power switch after exiting or shutting down the operating system. If you use Windows 95/98/2000/XP, click the Start button, click Shut Down, then click the OK button to shut down the computer. The power supply should turn off
  • Asus PR-DLS | PR-DLS User Manual - Page 57
    Chapter 4 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup
  • Asus PR-DLS | PR-DLS User Manual - Page 58
    Chapter summary 4.1 Managing and updating your BIOS 4-1 4.2 BIOS Setup program 4-5 4.3 Main Menu 4-8 4.4 Advanced Menu 4-15 4.5 Power Menu 4-22 4.6 Boot Menu 4-27 4.7 Server Menu 4-29 4.8 Exit Menu 4-30 ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 59
    mode. It does not work in the DOS prompt within Windows, and does not work with certain memory drivers that may be loaded when you boot from the hard or is not supported by the ACPI BIOS and therefore, cannot be programmed by the Flash Memory Writer utility. ASUS PR-DLS motherboard user guide 4-1
  • Asus PR-DLS | PR-DLS User Manual - Page 60
    5. Select 1. Save Current BIOS to File from the Main menu and press . The Save Current BIOS To File screen appears. 6. Type a filename and the path, for example, A:\XXX-XX.XXX, then press . 4-2 Chapter 4: BIOS Setup
  • Asus PR-DLS | PR-DLS User Manual - Page 61
    will solve your problems. Careless updating may result to more problems with the motherboard! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on to confirm the BIOS update, press Y to start the update. ASUS PR-DLS motherboard user guide 4-3
  • Asus PR-DLS | PR-DLS User Manual - Page 62
    process, and if the problem persists, load the original BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support. 4-4 Chapter 4: BIOS Setup
  • Asus PR-DLS | PR-DLS User Manual - Page 63
    motherboard supports a programmable Flash ROM that you can update using the provided utility described in section "4.1 Managing and updating your BIOS." Use the BIOS Setup program when you are installing a motherboard exactly match what you see on your screen. ASUS PR-DLS motherboard user guide 4-5
  • Asus PR-DLS | PR-DLS User Manual - Page 64
    4.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADVANCED Use this menu to enable and make changes to the advanced features. POWER Use this menu to configure power management features.
  • Asus PR-DLS | PR-DLS User Manual - Page 65
    key to load the Setup default values. While moving around through the Setup program, note that explanations appear in the Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. ASUS PR-DLS motherboard user guide 4-7
  • Asus PR-DLS | PR-DLS User Manual - Page 66
    . Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] Floppy 3 Mode Support [Disabled] This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows reading and writing of 1.2MB (as opposed to 1.44MB) on
  • Asus PR-DLS | PR-DLS User Manual - Page 67
    ] [All but Disk/Keyboard] Installed Memory [XXX MB] This field automatically displays the amount of conventional memory detected by the system during the boot process. ASUS PR-DLS motherboard user guide 4-9
  • Asus PR-DLS | PR-DLS User Manual - Page 68
    . If the hard disk was already formatted on an older system, Setup may detect incorrect parameters. In these cases, select [User Type HDD] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Before attempting to configure a hard disk drive, make sure you have
  • Asus PR-DLS | PR-DLS User Manual - Page 69
    [User Type HDD] Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or on When the Main menu appears, the hard disk drive field displays the size for the hard disk drive that you configured. ASUS PR-DLS motherboard user guide 4-11
  • Asus PR-DLS | PR-DLS User Manual - Page 70
    Type field to [User Type HDD] and the Translation Method field to [Manual]. CHS Capacity This field shows the drive's maximum CHS capacity as calculated by number of sectors per block to the highest number that the drive supports. Note that when this field is automatically configured, the set value
  • Asus PR-DLS | PR-DLS User Manual - Page 71
    . Set to [Disabled] to suppress Ultra DMA capability. To make changes to this field, set the Type field to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [5] [Disabled] ASUS PR-DLS motherboard user guide 4-13
  • Asus PR-DLS | PR-DLS User Manual - Page 72
    4.3.2 Keyboard Features Boot Up NumLock Status [On] This field enables users to activate the Number Lock function upon system boot. Configuration options: [Off] [On] Keyboard Auto-Repeat Rate [6/Sec] This controls the speed at which the system registers repeated keystrokes. Options range from 6 to
  • Asus PR-DLS | PR-DLS User Manual - Page 73
    4.4 Advanced Menu CPU Speed [Manual] This field displays the auto-detected Enabled] This item allows you to enable or disable support for Jackson Technology enabled processors which contain multiple logical processors . Configuration options: [Enabled] [Auto] ASUS PR-DLS motherboard user guide 4-15
  • Asus PR-DLS | PR-DLS User Manual - Page 74
    need to set this option to [Enabled]. Otherwise, leave to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] USB Legacy Support [Auto] This motherboard supports Universal Serial Bus (USB) devices. The default of [Auto] allows the system to detect a USB device at startup. If
  • Asus PR-DLS | PR-DLS User Manual - Page 75
    [Both] You can select to enable the primary IDE channel, both the primary and secondary channels, or disable both channels. Configuration options: [Both] [Primary] [Disabled] ASUS PR-DLS motherboard user guide 4-17
  • Asus PR-DLS | PR-DLS User Manual - Page 76
    4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] When set to [Read Only], this parameter protects files from being copied to floppy disks by allowing reads from, but not writes to, the floppy disk drive. The default setting [R/W] allows both reads and writes. Configuration options:
  • Asus PR-DLS | PR-DLS User Manual - Page 77
    channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] ASUS PR-DLS motherboard user guide 4-19
  • Asus PR-DLS | PR-DLS User Manual - Page 78
    -standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] PCI Latency
  • Asus PR-DLS | PR-DLS User Manual - Page 79
    : [Disabled] [Enabled] Onboard LAN Boot ROM [Disabled] Onboard 2nd LAN Boot ROM [Disabled] When set to [Enabled], these fields allow the system to boot from the network using the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled] ASUS PR-DLS motherboard user guide 4-21
  • Asus PR-DLS | PR-DLS User Manual - Page 80
    Management (APM) utility to keep the system time updated even when the computer enters suspend mode. In Windows 3.x and Windows 95, you need to install Windows with the APM feature. In Windows 98 or later, APM is automatically installed as indicated by a battery and power cord icon labeled "Power
  • Asus PR-DLS | PR-DLS User Manual - Page 81
    allows the BIOS to control the video display card if it supports the DPMS feature. [Blank Screen] only blanks the screen. as set in this user-configurable field. This feature does not affect SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] ASUS PR-DLS motherboard user guide 4-23
  • Asus PR-DLS | PR-DLS User Manual - Page 82
    . Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on. Onboard LAN Power Up [Disabled] Power Up on PCI Card [Disabled] These fields allow you to boot your computer from another computer by sending a wake-up frame
  • Asus PR-DLS | PR-DLS User Manual - Page 83
    Power On By PS/2 Keyboard [Disabled] This parameter allows you to use specific keys on the keyboard to turn on the system. This feature requires an ATX at a certain time and day by selecting [By Date]. Configuration options: [Disabled] [Everyday] [By Date] ASUS PR-DLS motherboard user guide 4-25
  • Asus PR-DLS | PR-DLS User Manual - Page 84
    Monitor MB Temperature [xxxC/xxxF] CPU1 Temperature [xxxC/xxxF] CPU2 Temperature [xxxC/xxxF] The onboard hardware monitor is able to detect the MB (motherboard) and CPU temperatures. Set to [Ignore] only if necessary. CPU1 Fan Speed [xxxxRPM] CPU2 Fan Speed [xxxxRPM] The onboard hardware monitor is
  • Asus PR-DLS | PR-DLS User Manual - Page 85
    include SCSI controllers or SCSI cards, RAID cards, and other devices on add-on cards with option ROM that hooks INT 13 to BIOS. The BCV devices present in the system will appear as options for this field. The field shows [None] if no BCV device is installed. ASUS PR-DLS motherboard user guide
  • Asus PR-DLS | PR-DLS User Manual - Page 86
    wish to assign a device as a 1st Boot device for a specific application, you must set that legacy device at the 1st Boot sequence. For this motherboard, the following options are present onboard: [Disabled] [Floppy] [HDD] [CD-ROM] [LAN Option ROM] [SCSI] Plug & Play O/S [No] This field allows you to
  • Asus PR-DLS | PR-DLS User Manual - Page 87
    to be sent out to VT100 terminal through COM1. This function is effective at BIOS POST and DOS environment. Configuration options: [Disabled] [Enabled] [POST Only] ASUS PR-DLS motherboard user guide 4-29
  • Asus PR-DLS | PR-DLS User Manual - Page 88
    CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit. If you attempt to exit the Setup program without saving your changes, the program prompts you with
  • Asus PR-DLS | PR-DLS User Manual - Page 89
    Setup menus. When you select this option or if you press , a confirmation window appears. Select [Yes] to load default values. Select Exit Saving Changes or make , a confirmation window appears. Select [Yes] to save any changes to the non-volatile RAM. ASUS PR-DLS motherboard user guide 4-31
  • Asus PR-DLS | PR-DLS User Manual - Page 90
    4-32 Chapter 4: BIOS Setup
  • Asus PR-DLS | PR-DLS User Manual - Page 91
    Chapter 5 This chapter tells how to install SCSI, LAN, and VGA drivers for various operating systems. OS Installation
  • Asus PR-DLS | PR-DLS User Manual - Page 92
    Windows NT Server 4.0 5-1 5.2 Microsoft Windows 2000 Server 5-9 5.3 Microsoft Windows XP Professional .......... 5-16 5.4 Novell NetWare Server 5-18 5.5 SUN Solaris 7 Server 5-22 5.6 SCO Open Server 5.0.x 5-28 5.7 SCO UnixWare Server 5-32 5.8 Linux RedHat 7.x 5-36 ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 93
    press F6, you are still allowed to load additional drivers later in the installation process. However, any drivers loaded during Windows NT Setup are not immediately recognized and no devices controlled by that driver are available during Windows NT Setup. ASUS PR-DLS motherboard user guide 5-1
  • Asus PR-DLS | PR-DLS User Manual - Page 94
    containing the Windows NT driver required to support your LSI adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and are created from above "Preparing a LSI Driver disk" Section. 4. Depending on the driver being installed, "Symbios Ultra3 PCI SCSI Driver" is
  • Asus PR-DLS | PR-DLS User Manual - Page 95
    support your LSI adapter(s). The path to copy manufacturer's files is: A:\WINNT\MINIPORT and select OK. 8. Depending on the driver being installed, Symbios Ultra3 PCI SCSI Driver is shown highlighted on the Install Driver menu. If it is not highlighted, select it. Choose OK. ASUS PR-DLS motherboard
  • Asus PR-DLS | PR-DLS User Manual - Page 96
    path to the OEM SCSI Adapter files, A:\WINNT LAN Driver Installation A. Preparing the Intel 82551QM/82544GC LAN Driver Disk Windows NT 4.0 does not have the drivers for the Intel 82551QM and Intel 82544GC LAN controllers. Before installing Windows NT 4.0, copy the LAN drivers from the PR-DLS support
  • Asus PR-DLS | PR-DLS User Manual - Page 97
    1. When the Installing Windows NT Networking screen appears, press Next to display the following screen. 2. Check the Wired to the Network box, then click Next. 3. On the screen that appears, click the button Select from list... to dispaly the following. ASUS PR-DLS motherboard user guide 5-5
  • Asus PR-DLS | PR-DLS User Manual - Page 98
    Insert the LAN driver disk that you created, then click Have Disk... 5. Type A:\ in the dialog box that appears, then click OK. The following screen lists the Intel LAN adapters that you can install. 6. Select Intel(R) PRO/100 Family Adapter, then click OK. Follow the succeeding screen instructions
  • Asus PR-DLS | PR-DLS User Manual - Page 99
    from the PR-DLS support CD. Refer to the section "A. Preparing the Intel 82551QM/82544GC LAN Driver Disk" if you have not yet created the LAN driver disk. 5. Follow steps 4 to 12 in the section "B. New System Installation" to install the required LAN drivers. ASUS PR-DLS motherboard user guide 5-7
  • Asus PR-DLS | PR-DLS User Manual - Page 100
    Rage XL Display Driver Installation 1. Insert the ASUS TRL-DLS support CD into your CD-ROM drive. 2. If Autorun in enabled in your computer, the following screen appears. Click on ATI Rage XL Display Driver to install the driver. If Autorun is disabled, install the display driver from the following
  • Asus PR-DLS | PR-DLS User Manual - Page 101
    prompted for the manufacturer-supplied hardware support disk, insert the appropriate LSI driver disk containing the Windows 2000 driver required to support your LSI adapter(s) and press Enter. The LSI Driver disk is creating prior to installing Windows 2000. ASUS PR-DLS motherboard user guide 5-9
  • Asus PR-DLS | PR-DLS User Manual - Page 102
    checked. Insert the appropriate LSI driver disk that contains the Windows 2000 driver required to support your LSI adapter(s) and press Enter. The LSI driver disk was created earlier. 9. The system scans the existing driver database and the floppy disk drive for drivers for the selected adapter. 10
  • Asus PR-DLS | PR-DLS User Manual - Page 103
    will load the driver from the LSI driver disk. A message box may appear indicating that the target (existing) driver is newer than the source (upgrade) driver. Click No to cancel the driver upgrade at this point or click Yes to continue the installation. ASUS PR-DLS motherboard user guide 5-11
  • Asus PR-DLS | PR-DLS User Manual - Page 104
    disk into the floppy disk drive when prompted. 4. Follow the screen instructions to complete the process. B. Update Driver on an Existing System Installation You may update the LAN driver directly from the PR-DLS support CD. 1. Insert the support CD into the CD-ROM drive. On the screen that appears
  • Asus PR-DLS | PR-DLS User Manual - Page 105
    When done, your Computer Management window shows the installed LAN adapters. 3. Highlight the Intel(R) 82554GC-based Network Connection, click the right mouse button, and select Properties to display the following. ASUS PR-DLS motherboard user guide 5-13
  • Asus PR-DLS | PR-DLS User Manual - Page 106
    button, and select Properties to display the following. You may also update the LAN drivers from the LAN Driver Disk if you created one. Follow these steps to update from the LAN driver disk. 1. Boot Windows 2000 system and log on as Administrator. 2. Click on the Start button. Select Settings
  • Asus PR-DLS | PR-DLS User Manual - Page 107
    . You do not need to load any driver for supporting the onboard ATI RAGE XL graphics controller chipset. 5.2.4 Enabling ATA100 Feature in Windows® 2000 To enable the ATA100 feature under Windows 2000, you need to upgrade to Windows 2000 Service Pack 2. ASUS PR-DLS motherboard user guide 5-15
  • Asus PR-DLS | PR-DLS User Manual - Page 108
    /82544GC chipset, ATI Rage XL chipset, and LSI 53C1010R or LSI 53C1030 SCSI controller. For Windows XP Professional users, we recommended that you use the Intel 82551QM/82544GC driver from the PR-DLS support CD. 1. Insert the PR-DLS support CD into the CD-ROM drive. 2. On the screen that appears
  • Asus PR-DLS | PR-DLS User Manual - Page 109
    5. Follow the succeeding installation instructions. 6. When done, the following screen appears. Click Finish to complete the installation. ASUS PR-DLS motherboard user guide 5-17
  • Asus PR-DLS | PR-DLS User Manual - Page 110
    \Sdms\Diskimag\Netware.exe 2. Use the manual to create driver disk. A. Preparing an LSI Driver disk The SDMS™ NWPA drivers for the Novell NetWare operating system are located on the ASUS Driver Support CD at: \Drivers\Sdms\Drivers\NetWare\ Copy all the drivers into a diskette and it will be used
  • Asus PR-DLS | PR-DLS User Manual - Page 111
    is loaded once for each LSI controller SCSI channel present in the system. Add the statement SLOT= to each load line in the STARTUP.NCF, by specifying the slot numbers written down in step 5 above, with only one slot number per load instance. ASUS PR-DLS motherboard user guide 5-19
  • Asus PR-DLS | PR-DLS User Manual - Page 112
    Drivers\Lan\makedisk\makenw.bat 2. Use the manual to create driver disk. If you need to use a floppy disk to install the onboard Intel 82551 network adapter drivers, use the MAKEDISK.BAT utility located at \Drivers\LAN\MAKEDISK in the ASUS Driver Support Windows NT W2K = Microsoft Windows* 2000
  • Asus PR-DLS | PR-DLS User Manual - Page 113
    .EXE utility. NET=xxxxxxxx is the unique network address for that LAN segment. The default frame type is 802.2. If your workstation needs to use the 802.3 frame type, see the section later in this document about using multiple frame types on one adapter. ASUS PR-DLS motherboard user guide 5-21
  • Asus PR-DLS | PR-DLS User Manual - Page 114
    need the VGA driver support. 5.5 SUN Solaris 7 Server 5.5.1 LSI® SCSI Driver Installation A. Building the SYMHISL Driver Update Disk 1. Use the self-extracting image files For the LSI_U3.SYS driver, the executable file is located here: \Drivers\Sdms\Diskimag\Solaris7.exe 2. Use the manual to create
  • Asus PR-DLS | PR-DLS User Manual - Page 115
    the Install Driver Update screen appears. 3. Remove the Solaris Device Configuration Assistant Diskette from the diskette drive and insert the first Solaris Driver ITU diskette you want. 4. Press F2_Continue. The Select Solaris System Version screen appears. ASUS PR-DLS motherboard user guide 5-23
  • Asus PR-DLS | PR-DLS User Manual - Page 116
    System devices are scanned. When scanning is complete, the Identified Devices screen appears. 12. Press F2_Continue. The message "Loading driver..." appears followed by messages about the drivers that are required to boot your system. After a few seconds, the Boot Solaris screen appears. 13. At the
  • Asus PR-DLS | PR-DLS User Manual - Page 117
    system: Installing unbundled device driver support Extracting driver list from tree... driver-name... Insert the Driver Update diskette labeled
  • Asus PR-DLS | PR-DLS User Manual - Page 118
    drivers, the newly supported hardware devices should be installed and configured according to the instructions in the corresponding Device Reference Page, if any. See the Device Reference Manual drives, see the System Administration Guide. 1. To add new or updated drivers, go to the root (\)
  • Asus PR-DLS | PR-DLS User Manual - Page 119
    didn't need to load the network driver for the onboard LAN device. 5.5.3 ATI® Rage XL Display Driver Installation Solaris 7 cannot support ATI Rage XL graphic default, you can configure the graphic as a "Standard VGA" device for supporting Solaris X Window. ASUS PR-DLS motherboard user guide 5-27
  • Asus PR-DLS | PR-DLS User Manual - Page 120
    SCSI Driver Installation A. Building the SCO OpenServer BTLD Diskette To create a BTLD diskette for SCO OpenServer system, copy the raw dd image file onto a 1.44MB floppy disk. This process is dependent upon the operating system that you are using to create this diskette. See the instructions below
  • Asus PR-DLS | PR-DLS User Manual - Page 121
    drive. This installation is necessary to build a new UNIX kernel that includes your SDMS driver. During installation, you are given the option of retaining current partitions on the root . 6. Continue the installation according to the SCO UNIX documentation. ASUS PR-DLS motherboard user guide 5-29
  • Asus PR-DLS | PR-DLS User Manual - Page 122
    to build a new UNIX kernel that includes the proper LSI host adapter driver. The basic steps for accomplishing this are outlined below. For more on UNIX installation, refer to the SCO UNIX System Administrator's Reference Manual. 1. The SCO OpenServer 5 system automatically creates a file unix.safe
  • Asus PR-DLS | PR-DLS User Manual - Page 123
    the network driver for the onboard LAN device. You can find the Intel 82551QM/82544GC Network driver from PR-DLS support CD at: \Drivers\Lan\UNIX\SCO5 Instructions for Installing the eeE Driver for system. At the command prompt, type: # reboot (or init 6) ASUS PR-DLS motherboard user guide 5-31
  • Asus PR-DLS | PR-DLS User Manual - Page 124
    upon the operating system that you are using to create this diskette. See the instructions below for UNIX System and DOS System Users. After you have created the driver disk, label it "PCI SCSI SCO UnixWare driver". For UNIX System Users: Follow these steps to create the BTLD diskette: 1. Insert
  • Asus PR-DLS | PR-DLS User Manual - Page 125
    : \Drivers\Sdms\Drivers\UNIXES \RAWRITE3.COM Instructions for driver disk. Insert the "PCI SCSI SCO UnixWare driver" diskette and press Enter. The kernel is built and the installation will terminate. 6. Remove the driver disk when prompted and reboot the system. ASUS PR-DLS motherboard user guide
  • Asus PR-DLS | PR-DLS User Manual - Page 126
    of the old kernel to reboot the system if the driver installation fails. Refer to Troubleshooting for more information. 3. Once the old kernel is saved, insert the "PCI SCSI SCO UnixWare driver" diskette. 4. Load the driver using the pkgadd command by typing: # pkgadd -d diskette1 5. Select C8XX
  • Asus PR-DLS | PR-DLS User Manual - Page 127
    documentation. 5.7.3 ATI® Rage XL Display Driver Installation SCO UnixWare 7.1.1 system can correctly recognize ATI Rage XL graphic controller (ATI MACH64) during installation. User doesn't need to load or modify the video driver for the onboard VGA device. ASUS PR-DLS motherboard user guide 5-35
  • Asus PR-DLS | PR-DLS User Manual - Page 128
    site at www.asus.com.tw/ products/addon/scsi/scsilan_drv.html. After downloading the file, extract the driver into a floppy disk. In the RedHat 7.0 installation wizard screen, you should use the "Linux dd" command to install RedHat Linux 7.0. 5.8.2 Intel 82551QM/82544GC LAN Driver Installation Linux
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
Motherboard
PR-DLS
User Guide