Asus PRIME X570-P X570 Series BIOS Manual English - Page 21

DIGI+ VRM Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings. VDDCR CPU Load-line Calibration Load-line affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions. Select from levels 1 to 7 to adjust the load-line slope. Configuration options [Auto] [Default] [Level 1] - [Level 7] The actual performance boost may vary depending on your CPU specification. DO NOT remove the thermal module. The thermal conditions should be monitored. VDDCR CPU Current Capability This item allows you to set the shut off current limit for external voltage regulator. A higher setting will allow the voltage regulator to supply more current while a lower setting will cause the voltage regulator to shut off the system when the supplied current is higher than the set value. Configuration options: [100%] [110%] [120%] [130%] Configure higher values when overclocking or under a high CPU loading for extra power support. VDDCR CPU Switching Frequency This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 200 to 350 with an interval of 50. DO NOT remove the thermal module. The thermal conditions should be monitored. VDDCR CPU Power Phase Control This item allows you to set the power phase control of the CPU. [Manual] Phase number is adjusted by current(A) step. [Optimized] Set to the ASUS optimized phase tuning profile. [Extreme] Set to the full phase mode. The following item appears only when the VDDCR CPU Power Phase Control is set to [Manual]. PRIME/PRO/TUF GAMING X570 Series BIOS Manual 21