Asus Pro WS W680-ACE IPMI IPMI Users Manual English - Page 47
M.2 installation, Completely loosen the screws on the heatsinks., Lift and remove the heatsinks.
View all Asus Pro WS W680-ACE IPMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2.1.4 M.2 installation Supported M.2 type varies per motherboard. If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with a thermal pad with a thickness of 1.25mm. • The illustrations only show the installation steps for a single M.2 slot, the steps are the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot. • Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in this section. • The M.2 is purchased separately. 1. Completely loosen the screws on the heatsinks. 2. Lift and remove the heatsinks. 1 1 2 Chapter 2 Pro WS W680-ACE Series 2-7
Pro WS W680-ACE Series
2-7
Chapter 2
2.1.4
M.2 installation
1.
Completely loosen the screws on the heatsinks.
2.
Lift and remove the heatsinks.
2
1
1
Supported M.2 type varies per motherboard.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with a thermal pad with a thickness of 1.25mm.
•
The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
•
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
•
The M.2 is purchased separately.