Asus Pundit-PH3 Pundit-PH3/PE3 Quick Start Guide for English Edition - Page 7
Installing an expansion card, Installing an optical drive, Installing a SATA hard disk drive
View all Asus Pundit-PH3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing an expansion card 1. Remove the metal cover opposite the slot that you intend to use. 2. Insert the card connector to the slot, then press the card firmly until it fits in place. Installing an optical drive 1. Drive a screw on the top right screw hole on both sides of the drive. 2. Connect the IDE and audio cable at the back of the drive. 3. Push the drive all the way into the bay until the drive lock clicks. 4. Connect a 4-pin power plug from the power supply unit to the power connector at the back of the drive. Installing a SATA hard disk drive 1. Drive two screws with rubber washers on both sides of the drive. 2. Connect the SATA signal and power plug at the back of the drive. Rubber washer Power cable and plug Signal cable and plug Quick Installation Guide 7