Asus R600 ASUS PND R600 QSG in English Version - Page 4

Install the Car Kit and Turn on the Device To turn on the device, turn on the main power switch at the back of device, then press the Sleep Mode Button ( ) on the top of the device. Main power switch Note: - When the main power switch is set to Off, the device is not able to be charged. - If you press the Sleep Mode button when the device is on, it enters into sleep mode. - When the device is on, it takes longer time for the battery to be fully charged. When the device is in sleep mode, the battery can be fully charged quickly. To install the car kit: Sleep Mode Button screwcap A 1. Attach the cradle to the gooseneck (1). 2. Attached the cupula to the windshield inside your car (3). 3. Press the8 lever (4) to secure the cupula on the windshield surface. screwcap B Note: Rise the lever (2) to release the cupula from the windshield. 4. Adjust the angle of the gooseneck and secure it by fastening screwcap A. 5. Adjust the angle of the cradle and secure it by fastening screwcap B. 6. Carefully place and slide the device into the cradle (5).