Asus ROG MAXIMUS VIII FORMULA MAXIMUS VIII FORMULA Users manual Traditional Ch - Page 100
第三章:BIOS 程式設定, External DIGI+ Power Control
View all Asus ROG MAXIMUS VIII FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Misc. MRC Fast Boot [Auto] MRC fast boot Auto] [Disabled] [Enabled]。 DRAM CLK Period [Auto] Auto] [1] - [40]。 Memory Scrambler [Enabled] Memory Scrambler Enabled] [Disabled]。 Channel A DIMM Control [Enable Both DIMMS] Channel A Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。 Channel B DIMM Control [Enable Both DIMMS] Channel B Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。 MCH Full Check [Auto] Enabled Disabled DRAM Auto] [Enabled] [Disabled]。 DLLBwEn [Auto] 2 到 4 Auto] [1] - [7]。 External DIGI+ Power Control CPU Load-Line Calibration [Auto] Load-line 是根據 Intel VRM CPU 電壓。CPU CPU CPU 及 VRM Level 1 至 8 0% 至 100 Auto] [Level 1] - [Level 8]。 CPU 3-14 BIOS 第三章
3-14
第三章:BIOS 程式設定
第三章
Misc.
MRC Fast Boot [Auto]
本項目用來啟動、關閉或自動設定 MRC fast boot 功能。設定值有:[Auto]
[Disabled] [Enabled]。
DRAM CLK Period [Auto]
設定值有:[Auto] [1] – [40]。
Memory Scrambler [Enabled]
本項目用來啟動或關閉 Memory Scrambler 支援。設定值有:[Enabled]
[Disabled]。
Channel A DIMM Control [Enable Both DIMMS]
提供您啟用或關閉 Channel A 記憶體插槽。設定值有:[Enable Both DIMMS]
[Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。
Channel B DIMM Control [Enable Both DIMMS]
提供您啟用或關閉 Channel B 記憶體插槽。設定值有:[Enable Both DIMMS]
[Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。
MCH Full Check [Auto]
設定本項目為
[Enabled]
,可以增強系統穩定性。設定為
[Disabled]
,則可以增
強 DRAM 超頻的相容性。設定值有:[Auto] [Enabled] [Disabled]。
DLLBwEn [Auto]
設定數值為 2 到 4 以獲得最佳的記憶體超頻。設定值有:[Auto] [1] - [7]。
External DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line 是根據 Intel
®
所訂立之 VRM 規格,其設定值將影響 CPU 電壓。CPU
運作電壓將依 CPU 的負載呈比例性遞減,當您將此項目的設定值設定越高時,將
可提高電壓值與超頻能力,但會增加 CPU 及 VRM 的溫度。請從 Level 1 至 8 來
調整處理器電源電壓從 0% 至 100%。設定值有:[Auto] [Level 1] - [Level 8]。
實際提昇的效能將視 CPU 型號而異。
請勿將散熱系統移除,散熱環境需受到監控。