Asus RS161-E2 User Manual - Page 62
Power/Soft-off button Yellow 2-pin POWERBTN
UPC - 610839630424
View all Asus RS161-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
13. System panel connector (20-pin PANEL1) This connector supports several chassis-mounted functions. K8N-DRE PANEL1 ¤ HDLED+ POWERLED+ HDLED- GND POWERLED- NMIBTN# MLED+ GND MLED- POWERBTN# NC GND +5V NC GND RESETBTN# GND GND SPKROUT K8N-DRE System panel connector The system panel connector is color-coded for easy connection. Refer to the connector description below for details. • System power LED (Green 3-pin POWERLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity (Red 2-pin HDDLED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. If an optional SCSI or SATA add-in card is installed, the read or write activities of any device connected to the SCSI or SATA add-in card causes this LED to light up. • System warning speaker (Orange 4-pin SPKROUT) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. • Power/Soft-off button (Yellow 2-pin POWERBTN) This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (Blue 2-pin RESETBTN) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 4-16 Chapter 4: Motherboard info