Asus RS161-E4 User Manual - Page 116
RAID driver installation
UPC - 610839640652
View all Asus RS161-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
7.1 RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS installation. Creating a RAID driver disk You may have to use another system to create the RAID driver disk from the system/motherboard support CD or from the Internet. A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. You can create a RAID driver disk in DOS (using the Makedisk application in the support CD) or in Windows® environment. To create a RAID driver disk in DOS: 1. Place the motherboard support CD in the optical drive. 2. Restart the computer, then enter the BIOS Setup. 3. Select the optical drive as the first boot priority to boot from the support CD. Save your changes, then exit the BIOS Setup. 4. When prompted, press any key to boot from the support CD. Loading FreeDOS FAT KERNEL GO! Press any key to boot from CDROM... The Makedisk menu appears. a) FreeDOS command prompt b) Create NVIDIA nForce(TM) PATARAID Driver for Win2K/2K3 32 bit driver c) Create NVIDIA nForce(TM) SATARAID Driver for Win2K/2K3 32 bit driver d) Create NVIDIA nForce(TM) PATARAID Driver for Win2K3 64 bit driver e) Create NVIDIA nForce(TM) SATARAID Driver for Win2K3 64 bit driver 5. Place a blank, high-density floppy disk to the floppy disk drive. When you insert a floppy disk with data, the utility erases all the data before copying the RAID drivers. 7-2 Chapter 7: Driver installation