Asus RS520-X5 PS8 User Manual - Page 48
LAN controller setting 3-pin LAN_EN1, Fan control setting 3-pin FAN_SEL1
View all Asus RS520-X5 PS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. LAN controller setting (3-pin LAN_EN1) This jumper allows you to enable or disable the onboard Intel® 82563EB Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature. 5. Fan control setting (3-pin FAN_SEL1) This jumper allows you to switch for fan pin selection Set to pins 1-2 for 4-pin fans or pins 2-3 for 3-pin fans. • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will not work and the fan you installed will always run at full speed. 4-6 Chapter 4: Motherboard information
4-6
Chapter 4: Motherboard information
4.
LAN controller setting (3-pin LAN_EN1)
This jumper allows you to enable or disable the onboard Intel
®
82563EB
Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature.
5.
Fan control setting (3-pin FAN_SEL1)
This jumper allows you to switch for fan pin selection Set to pins 1-2 for 4-pin
fans or pins 2-3 for 3-pin fans.
•
If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed
may not work.
•
If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will
not work and the fan you installed will always run at full speed.