Asus RT-N600 users manual in English - Page 79

How to restore the system to its default settings?

Get Asus RT-N600 PDF manuals and user guides View all Asus RT-N600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

• If there is still no Internet access, try to reboot your computer and verify the network's IP address and gateway address. • Check the status indicators on the ADSL modem and the wireless router. If the WAN LED on the wireless router is not ON, check if all cables are plugged properly. How to restore the system to its default settings? • Go to Administration > Restore/Save/Upload Setting, and click Restore. The following are the factory default settings: • User Name: admin • Password: admin • Enable DHCP: Yes (if WAN cable is plugged in) • IP address: 192.168.50.1 • Domain Name: (Blank) • Subnet Mask: 255.255.255.0 • DNS Server 1: 192.168.50.1 • DNS Server 2: (Blank) • SSID (2.4GHz) and SSID (5GHz) settings: • For USA and Canada: • SSID (2.4GHz): Refer to the label at the bottom of the router • SSID (5GHz): Refer to the label at the bottom of the router 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
79
•
If there is still no Internet access, try to reboot your computer
and verify the network’s IP address and gateway address.
•
Check the status indicators on the ADSL modem and the
wireless router. If the WAN LED on the wireless router is not ON,
check if all cables are plugged properly.
How to restore the system to its default settings?
•
Go to
Administration
>
Restore/Save/Upload Setting
, and
click
Restore
.
The following are the factory default settings:
•
User Name:
admin
•
Password:
admin
•
Enable DHCP:
Yes (if WAN cable is plugged in)
•
IP address:
192.168.50.1
•
Domain Name:
(Blank)
•
Subnet Mask:
255.255.255.0
•
DNS Server 1:
192.168.50.1
•
DNS Server 2:
(Blank)
•
SSID (2.4GHz) and SSID (5GHz) settings:
•
For USA and Canada:
•
SSID (2.4GHz):
Refer to the label at the bottom of
the router
•
SSID (5GHz):
Refer to the label at the bottom of
the router