Asus Rampage II Extreme User Guide - Page 110
Onboard Device Configuration
UPC - 610839166183
View all Asus Rampage II Extreme manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
3.5.3 Onboard Device Configuration BIOS SETUP UTILITY Advanced Onboard Device Configuration Onboard Device [Standard] High Definition Audio [Enabled] Front Panel Type [HD Audio] J-Micron eSATA/PATA Controller [Enabled] Controller Mode [IDE] Marvell LAN1 [Enabled] Marvell LAN2 [Enabled] LAN Boot ROM [Disabled] Onboard 1394 Controller [Enabled] Enable or Disable High Definition Audio Controller Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Onboard Device [Standard] Allows you to disable the onboard device controllers. Configuration options: [Standard] [Disabled] High Definition Audio [Enabled] Allows you to enable or disable the High Definition Audio Controller. Configuration options: [Enabled] [Disabled] Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] J-Micron eSATA/PATA Controller [Enabled] Allows you to enable or disable the onboard JMicron eSATA/PATA controller. Configuration options: [Enabled] [Disabled] Controller Mode [IDE] This item appears only when you enable the previous item. Configuration options: [IDE] [AHCI] If you want to use the hard disk drive as a Parallel ATA physical storage device, keep the defaul setting [IDE]. If you want the hard disk drive to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. MarvelI LAN1/2 [Enabled] Allows you to enable or disable the onboard Marvell LAN port1/2. Configuration options: [Enabled] [Disabled] 3-28 Chapter 3: BIOS setup