Asus S2-P8H61E User Manual - Page 50

GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND P8H61-I 3.4 Connectors 1. Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1/2) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s or 6Gb/s hard disk and optical disk drives. SATA1 SATA2 P8H61-I SATA connectors You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. 2. USB connectors (10-1 pin USB910, USB1112) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. USB1112 PIN 1 USB+5V USB_P11USB_P11+ GND USB+5V USB_P12USB_P12+ GND NC USB910 PIN 1 USB+5V USB_P9USB_P9+ GND USB+5V USB_P10USB_P10+ GND NC P8H61-I P8H61-I USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! • The USB module is purchased separately. • Connect the USB header to the front I/O port with USB port cable and card reader cable. 3-4 Chapter 3: Motherboard info