Asus SABERTOOTH Z170 MARK 1 User Guide - Page 86
Internal CPU Power Management, CPU System Agent Boot Voltage [Auto], Turbo Mode Parameters
View all Asus SABERTOOTH Z170 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CPU System Agent Boot Voltage [Auto] The voltage for CPU System Agent at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage [Auto] The voltage for CPU VCCIO at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] CPU Standby Boot Voltage [Auto] The voltage for CPU Standby at initial boot. Configuration options: [Auto] [0.7000] - [2.2000] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) [Auto] Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode [Enabled] Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] The following items appear only when you set the Turbo Mode to [Enabled]. Turbo Mode Parameters Long Duration Package Power Limit [Auto] Allows you to limit the Turbo Ratio's time duration that exceeds the TDP (Thermal Design Power) for maximum performance. Use the and keys to adjust the value. Configuration options: [Auto] [1] - [4095] Package Power Time Window [Auto] Also known as Power Limit 1, and allows you to maintain the time window for Turbo Ratio over TDP (Thermal Design Power). Use the and keys to adjust the value. Configuration options: [Auto] [1] - [127] Short Duration Package Power Limit [Auto] Also known as Power Limit 2, and allows you to provide rapid protection when the package power exceeds the Power Limit 1. Use the and keys to adjust the value. Configuration options: [Auto] [1] - [4095] IA AC Load Line [Auto] This item allows you to set the AC loadline defined in 1/100 mOhms. Use the and keys to adjust the value. Configuration options: [Auto] [0.01] - [62.49] Chapter 3 3-22 Chapter 3: BIOS Setup