Asus SK8V SK8V User Manual - Page 45
ASUS SK8V motherboard, Floppy disk drive connector 34-1 pin FLOPPY, RAID ATA/133/100/66/33 connector
View all Asus SK8V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
® ® 2. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). PIN 1 FLOPPY NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. SK8V SK8V Floppy Disk Drive Connector 3. RAID ATA/133/100/66/33 connector (40-1 pin PRI_RAID) This connector support either RAID 0, RAID 1 or RAID 0 + 1 configuration with the Serial ATA connectors through the onboard Promise® PDC20378 controller. You can use the RAID feature to set up a disk array configuration and to support additional IDE devices. PRI_RAID PIN 1 SK8V SK8V PRI_RAID Connectors NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. Important notes on the RAID feature: • By default, the drive that you connect to the PRI_RAID connector follow the ATA133/100/66/33 protocol as an independent drive, not as a disk array. • The RAID/SATA controller chipset does not support ATAPI devices such as CD-ROMs, DVD-ROMs, etc. ASUS SK8V motherboard 2-23