Asus T2-R T2-R User Manual - Page 76
Motherboard info, IDE connectors 40-1 pin PRI_IDE, SEC_IDE, Internal audio connectors 4-
UPC - 610839531141
View all Asus T2-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) The PRI_IDE connector is for the Ultra ATA100 IDE hard disk ribbon cable. Connect the cable's blue connector to the IDE connector, then connect the gray connector to a secondary master device (optical drive) and the black connector to the Ultra ATA100 primary master device (hard disk drive). Configure the hard disk drive and the optical drive as primary/secondary master device by adjusting their jumper settings. Refer to their respective documentation for details. Pin 20 on the IDE connector is removed to match the covered hole on the Ultra ATA cable connector. This prevents incorrect orientation when you connect the cables. For Ultra ATA133 IDE devices, use an 80-conductor IDE cable. NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. SEC_IDE PRI_IDE ® P4R8T P4R8T IDE Connectors PIN 1 6. Internal audio connectors (4-pin AUX, CD) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. Left Audio Channel Ground Right Audio Channel ® P4R8T P4R8T Internal Audio Connectors Left Audio Channel Ground Right Audio Channel AUX(White) CD(Black) 76 Chapter 4: Motherboard info