Asus TUF SABERTOOTH 990FX R3.0 SABERTOOTH 990FX R3.0 Users Manual English - Page 80
Monitor menu, CPU Fan Speed, Chassis Fan 1-3 Speed, Water Pump
View all Asus TUF SABERTOOTH 990FX R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down on the menu to display more items. Chapter 3 CPU Temperature / MB Temperature [xxx°C/xxx°F] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage, VDDA2.5V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignore if you do not want to detect this item. CPU Fan Speed, CPU Opt Fan Speed, Chassis Fan 1-3 Speed, Water Pump Speed [xxxx RPM] or [Ignore] / [N/A] The onboard hardware monitor automatically detects and displays the CPU and chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected speed. CPU Q-Fan Control [PWM Mode] [Disabled] Disable the Q-Fan control. [PWM Mode] Enable the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan. [DC Mode] Enable the CPU Q-Fan control feature in DC mode for 3-pin CPU fan. The following items appear only when you set CPU Q-Fan Control to [PWM Mode] or [DC Mode]. CPU_FAN Speed Low Limit [600 RPM] This item allows you to disable or set the CPU fan warning speed. Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] 3-26 Chapter 3: BIOS Setup