Asus V2-PH1 Vintage2-PH1 User''s Manual for English Edition - Page 32
Remove the dummy drive slot cover from the front panel.
View all Asus V2-PH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
8. Connect the other end of the IDE ribbon cable to the Primary IDE connector (labeled PRI_IDE) on the motherboard. See page 4-4 for the location of this connector. 9. Connect the other end of the audio cable to the black 4-pin connector labeled CD on the motherboard. See page 4-7 for the location of this connector. 10. Remove the dummy drive slot cover from the front panel. 3 4 4 10. Replace the front panel. Refer to section "2.11 Replacing the side plates and front cover" on page 2-20 for details. 2-14 Chapter 2: Basic installation
2-14
Chapter 2: Basic installation
8.
Connect the other end of the IDE ribbon cable to the Primary IDE
connector (labeled PRI_IDE) on the motherboard. See page 4-4 for the
location of this connector.
9.
Connect the other end of the audio cable to the black 4-pin connector
labeled CD on the motherboard. See page 4-7 for the location of this
connector.
10.
Remove the dummy drive slot cover from the front panel.
4
4
3
10.
Replace the front panel. Refer to section “2.11
Replacing the side
plates and front cover” on page 2-20 for details.