Asus VC279N-W User Guide - Page 14

2.1 Detaching the base (for VESA wall mount) To detach the base, perform the following: 1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. 2. Using a coin, turn the screw counter-clockwise to loosen the screw located at the bottom of the base. 3. Remove the base from the stand. 4. Remove the stand cover. Then loosen the 4 screws to remove the stand. 5. Align and install the wall mount bracket on the rear of the monitor. Screw holes for VESA wall mount (100 x 100 mm) • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • Hold the base while removing the screw. • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg (Screw size: M4 x 10 mm). 2-1 Chapter 2: Setup