Asus VW199S User Manual - Page 12
Detaching the arm/stand, for VESA wall mount - vw199 led monitor
View all Asus VW199S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2.1 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VW199 Series LED monitor is specially designed for VESA wall mount. To detach the arm/stand: 1. Remove the arm cover. 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 4. Detach the stand from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • Hold the stand of the monitor when you remove the screws. screws • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. 2-1 Chapter 2: Setup
2-1
Chapter 2: Setup
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW199 Series LED monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
1.
Remove the arm cover.
2.
Have the front of the monitor face down on a table.
3.
Use a screwdriver to remove the three screws on the stand of the monitor as
the below drawing shows.
4.
Detach the stand from the monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor when you remove the screws.
screws
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.