Asus VW225TL User Guide - Page 14
Detaching the arm/base for VESA, wall mount, Adjusting the monitor angles
View all Asus VW225TL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2.2 Adjusting the monitor angles • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the base to prevent the monitor from falling when you change its angle. • You can tilt the monitor's from -3º to 20º, swivel from left-to-right for 45º, and lift the monitor's height for about 70mm. -3º~20º 70mm 45º 45º 0º 2.3 Detaching the arm/base (for VESA wall mount) The detachable arm / base of the VW195xL/VW202xL/VW225xL Series LCD monitor is specially designed for VESA wall mount. To detach the arm/base 1. Lower the monitor to its lowest height, and then insert the monitor height adjustment lock (Figure 1). 2. Have the front of the monitor face down on a table. 3. Remove the rubbers in the four screw holes (Figure 2). 4. Use a screwdriver to remove the two screws on the arm (Figure 2), then slide out the arm/base to detach it from the monitor (Figure 3). 2-2 Chapter 2: Setup