Asus WL 320gE User Manual - Page 48
The ASUS 802.11g AP is not, accessible., ASUS 802.11g Access Point, Default Value - troubleshooting
UPC - 610839729920
View all Asus WL 320gE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 4 -Troubleshooting The ASUS 802.11g AP is not accessible. If the ASUS 802.11g AP is not accessible, restore it to its factory default settings. Use a pen or paper clip to press the Reset button at the rear panel for over five seconds. The power LED lights up when the AP is successfully restored to its factory default settings. The following settings are the factory default settings of the ASUS 802.11g AP. Name Default Value Wireless - Interface SSID Channel Encryption (WEP) Broadcast SSID Wireless - Bridge AP Mode Wireless - Access Control MAC Access Mode IP Config - LAN IP Address Get IP Address Automatically Subnet Mask Gateway System Setup - Password Operation Mode User Name Password default 6 None No Access Point Only Disabled 192.168.1.1 Yes 255.255.255.0 (blank) Access Point admin admin 4. Troubleshooting 48 ASUS 802.11g Access Point