Asus XONAR U3 User Manual - Page 24

8.3.2 Recording/Monitoring Volume 1 7 6 5 4 3 2 No Item Description 1 Recording Volume Tab Click this button to show the recording volume page. 2 Source / path name This shows the source name for each volume control slider, including: MIC: recording from MIC jack Line-In: recording from Line-in jack for external audio devices WAVE: recording from digital wave audio you are playing on PC 3 Monitoring button Click this button to monitor and loopback recording audio to outputs (PC speakers). Therefore, the recording volume will influence the monitoring signals from speaker outputs. The audio will be mixed into the streams you are playing out from your PC and all DGP effects will be applied to the source, too. 4 Recording Selector button Click this button to select the path/source you are going to record. Please note that the recording function on Windows is a one-path selector. So, you can select only one default recording source at a time. You may have to restart the recorder program if you switch to a different source. (Note: On Vista, some application programs may allow you to select the recording device/path in the recording programs themselves.) 5 Recording Volume Slider Drag this slider down to decrease the recording volume; drag up to increase the recording volume. The tool-tip reveals the percentage number from 1 to 100 in terms of the full scale level. 6 Left/Right balance This horizontal slider controls the volume between the left and right channels. 7 Reset Click to reset all volume controls to the default settings. 18 ASUS Xonar U3