Asus p4s800mx P4S800-MX English User Manual E1447 - Page 24
Product introduction - cpu settings
View all Asus p4s800mx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). Both jumpers are set to pins 1-2 (+5V) by default because not all computers have the appropriate power supply to support this feature. The USBPW_12 and USBPW_34 jumpers are for the rear USB ports. The USBPW_56 jumper is for the internal USB header that you can connect to the front USB ports. 1. This feature requires a power supply that can provide at least 1A on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system would not power up. 2. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. P4S800-MX P4S800-MX USB Device Wake Up USBPW12 USBPW34 2 1 +5V (Default) 3 2 +5VSB USBPW56 12 23 +5V (Default) +5VSB 3. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see 2.5.5 "APM Configuration"). P4S800-MX KBPWR1 12 23 +5V (Default) +5VSB P4S800-MX Keyboard Power Setting 1-16 Chapter 1: Product introduction