Audiovox SBAR User Manual - Page 11

Specifications

Power Supply

DC12V

Power Consumption

<6W

Current Draw

<400 mA

Operating Temperature Range

0

to 50

Fuse

2 Amps

Maintenance

Though your system requires little care, you will still need to maintain its

condition and performance by following the guidelines below.

•

Keep your system away from excessive moisture, extreme heat or

cold.

•

Occasionally clean the surface of the SBAR with a soft cloth

moistened with water or glass cleaner.

•

Remove snow or ice build up as this may cause the system to issue

a false alarm.

•

DO NOT Paint the SBAR. Painting will interfere with the

operation of the sensors.

10

Section	Page
Warnings	3
CAUTION: Do not back up your vehicle while watching the monitor screen. Always look in the direction the vehicle is traveling. Use the monitor and sensors as an aid to ensure there are no children or obstructions. The image on the monitor is not designed to show distance and may be misleading. The actual distance is less than appears in the monitor. The range of the image is limited. The warning tone is not designed to indicate a set distance and may be misleading. The actual distance may be less than the last time it was used due to weather conditions or obstruction by dirt. The range of the sensor is limited. Be aware of blind spots since all models of vehicles are shaped differently.	4
SBAR Installation	6
Installing the SBAR on the License Plate	7
Wiring the Power to the Vehicle’s Reverse Lamp	8

Audiovox SBAR User Manual - Page 11

Specifications, Maintenance

Page 11 highlights