Audiovox SC-C1 Installation Guide - Page 8

Connections - sirius connect vehicle tuner

Page 8 highlights

Connections Connector Information Figure 1 identifies and describes the connectors on the SC-C1 Vehicle Tuner. Figure 2 identifies the 8-pin pin-out configuration. • SC OUTPUT: Connection for the SC Interface Cable. • ANTENNA: Connection for the satellite antenna. Connect to Sirius-Ready Headunit or SiriusConnect Interface Translator Figure 1 1 Battery 7 8 2 Power Enable 6 4 3 Serial Data (RX) 3 5 4 Ground 5 Audio Right 1 2 6 Serial Data (TX) 7 Audio Ground 1 Audio Left Figure 2 Note 1: The Serial Data TX and RX lines in the SiriusConnect Interface cable are crossed Note 2: The Audio output is 1volt RMS.  [ Connections ]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

[
Connections
]
Connections
Connector Information
Figure 1 identifies and describes the connectors on the SC-C1 Vehicle Tuner. Figure 2 identi-
fies the 8-pin pin-out configuration.
SC OUTPUT:
Connection for the SC Interface Cable.
ANTENNA:
Connection for the satellite antenna.
6
7
3
1
4
8
1
Battery
2
Power Enable
3
Serial Data (RX)
4
Ground
5
Audio Right
6
Serial Data (TX)
7
Audio Ground
1
Audio Left
5
2
Note 1: The Serial Data TX and RX lines in the SiriusConnect Interface cable are crossed
Note 2: The Audio output is 1volt RMS.
Figure 1
Figure 2
Connect to Sirius-Ready
Headunit or SiriusConnect
Interface Translator