Audiovox SIR-PNP3 User Guide - Page 25

increase (CW) or decrease (CCW) to se lect the desired day from the default value (Monday). Channel: Rotate the Encoder knob to scroll through a listing of all the Sirius streams in a circular motion. The listing should encompass all 5 available lines. When the desired channel is highlighted,press the Encoder knob. Program Alert On/Off: Rotate the Encoder knob to toggle between Program Alert On or Program Alert Off. When the desired alert status is high lighted, press the Encoder knob. NOTE: This function is especially useful when the shuttle is being powered by battery (Car etc.). The following options are available in this mode: Enabled Disabled (Default) Rotate the Encoder knob to toggle between Enabled and Disabled. When the desired shut down status is highlighted, press the Encoder knob. Sleep Mode: In this mode, you have the capability of program ming the unit to shut off after a selected period of time. The screen displays Sleep Mode on the top line, with optional time settings as follows: Auto Shutdown In this mode, you have the option of programming the unit to automatically shut off after a 1-hour period without any user intervention. After 59 minutes of inactivity, a beep tone sounds, and a display prompt appears on the screen, stating Cancel Auto Shutdown. Press the Encoder knob to terminate the function temporarily. Sleep Off (Factory Default) 15 minute 30 minute 45 minute 60 minute -25- 128-7193A 25 of 32