Audiovox ST5TK1 User Guide - Page 52
Step 3: Use the suction cups to temporarily install the FEA according to your
UPC - 884720011085
View all Audiovox ST5TK1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Step 2: Prepare the FEA for temporary installation Attach the suction cups to the antenna portion of the FEA in the positions shown in Figure 31. The antenna portion of the FEA is the relatively thinner section of the cable in between the bead and the arrow that transmits the FM signal to your vehicle's FM antenna. ATTACH SUCTION CUPS AS SHOWN ARROW ON BOTH ENDS OF THE THIN WIRE BEAD ANTENNA CABLE CONNECTS TO YOUR SIRIUS VEHICLE DOCK'S 'FM OUT' CONNECTOR THIS THINNER PORTION OF THE FEA IS WHAT TRANSMITS THE FM SIGNAL TO YOUR VEHICLE'S FM ANTENNA DURING THE FINAL INSTALLATION USE THE CABLE GUIDES TO HOLD THE CABLE IN POSITION UNTIL IT REACHES THE INNER TRIM OR MOULDING Figure 31 Step 3: Use the suction cups to temporarily install the FEA according to your vehicle's antenna type On the next several pages you will find the FEA mounting location for your type of FM antenna (A, B, C, etc.). Before attaching the FEA, clean the area where the suction cups will be mounted with the supplied alcohol swab. The FEA wire between the two suction cups should be pulled taut and as straight as possible, and should not obstruct the driver's view. 52 Installation