Audiovox VE926 Owners Manual - Page 20

SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display. 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC). 5) When the desired mode is reached, press the ON/OFF button to confirm. SETTING THE AIR TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) Press the SEEK button to select the AIR mode. 3) Press the ON/OFF button to confirm. SETTING THE SPEAKER MODE 1) With power off, press the SET button four times to enter the speaker configuration mode. ″ISP (or ESP) ″ appears on the VFD. 2) Press the seek button to toggle between the ″I SP″ and ″E SP″ 3) When the desired mode is reached, press the ON/OFF button. SETTING THE INTERCOM MODE 4) With power off, press the SET button five times to enter the intercom configuration mode. ″Int On (or Int OFF) ″ appears on the VFD. 5) Press the seek button to toggle between the ″Int On″ and ″Int OFF″ 6) When the desired mode is reached, press the ON/OFF button. * Int OFF : default, No response to call signal. SETTING THE PRESETS (IN AM, FM OR TV MODES) 1) Tune to the desired channel/station. 2) Press the SET button and the display flashes. 3) Press desired preset (P1, P2, P3 & P4) to confirm the selection. NOTE: you can preset 4- AM, 4- FM and 4- TV Programs 19