Audiovox VOD916 Operation Manual - Page 14

Turning the VOD916 On or Off, Overhead Dome Lights - installation manual

Page 14 highlights

Turning the VOD916 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displaying a picture, adjust the viewing angle by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. Overhead Dome Lights The lights integrated into the VOD916 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times, and the auto position will allow the lights to turn on and off with the vehicle's interior lighting. Refer to the Installation Manual for the wire connections. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. I NPUT VIDE O AUDI O IR LR AUTO PROG AP CHANNEL SOURCE S ON OFF AUTO FM VOLUME SELECT HEADPH ONES Dome Light Switch -14- 128-6747 14 of 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

128-6747
14 of 31
-
14
-
Turning the VOD916 On or Off
1.
Sliding
the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen
downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while
the system is in use.
2.
Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use
the internal backlighting will illuminate the controls.
3.
After the unit has been turned on and
is displaying a picture, adjust the viewing angle by pivoting the screen to
optimize the picture quality.
4.
Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Overhead Dome Lights
The lights integrated into the VOD916 are controlled
by a three position slide switch.
Sliding the switch to
the on position will turn the lights on.
The off position
will prevent
the lights from turning on at all times, and
the auto position will allow the lights to turn on and off
with the vehicle’s interior lighting. Refer to the Installation
Manual for the wire connections.
Do not leave the
vehicle unattended with the dome light switch in the on
position, as this could result in a discharged battery.
CHANNEL
SOURCE
VOLUME
FM
SELECT
ON
OFF
AUTO
AUTO
PROG
H
E
A
D
P
H
O
N
E
S
I
N
P
U
T
A
U
D
I
O
L
R
V
I
D
E
O
I
R
S
Dome
Light
Switch
AP