Audiovox VOH802 Operation Manual - Page 12

Wired FM Modulator (P/N 0190730) Your video system may be equipped with an RF modulator, that allows you to listen to the VOH802's audio signal by tuning your vehicle's radio to the selected frequency, (88.7 or 89.1- check with your installer) and tuning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver's side of the dash, check with your installer for the exact location.) Whenever the RF modulator is on, broadcast radio reception will be poor. Turning the remote mounted toggle switch off will allow for normal radio reception. Video Output The VOH802 provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the VOH802 to an additional monitor or video display. Please see your installer for more information. Audiovox Video Cassette Player (Aux Video 1) In most installations a VCP will be connected to the "Video 1" input. To view a video cassette, turn the AVP7000/ AVP7285 on and press the source button on its control panel or the TV/Video button on the remote control unit until "Video 1" is displayed on the screen. The VCP may also be operated with the remote or the buttons on its face. Inserting a tape into the VCP will turn it on and automatically activate the play mode. If a rewound tape had been loaded into the VCP, prior to its activation press play on the VCP or the remote control to view the tape. For more information see the owner's manual accompanying your VCP. -12-