Behringer 112 DUAL VCO Quick Start Guide - Page 2
Installation, Specifications - system 100
View all Behringer 112 DUAL VCO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Specifications Pulse Width Input Type Impedance Maximum input level VCO Output Type Impedance Maximum output level Frequency range with no external CV Frequency range using external CV Sync Input Type Impedance Maximum input level Minimum input to trigger Sync Output Type Impedance Maximum output level 2 x 3.5 mm TS jacks, DC coupled 70 kΩ, unbalanced ±10 V, 4% per volt 4 x 3.5 mm TS jacks, DC coupled 1 kΩ, unbalanced 10 V p-p 10 Hz to 500 Hz 1 Hz to 30 kHz 2 x 3.5 mm TS jacks, DC coupled 100 kΩ, unbalanced 10 V p-p 2.5 V p-p 2 x 3.5 mm TS jacks, DC coupled 1 kΩ, unbalanced 10 V p-p Control Inputs Type Impedance CV range Controls PW level PW manual Waveform Range Pitch Weak/strong Mod level Power Power supply Current draw Physical Dimensions Rack units Weight 6 x 3.5 mm TS jacks, summed 50 kΩ, unbalanced ±10 V, 1 V/oct -∞ to unity gain 50% to min Triangle, sawtooth, pulse 32', 16', 8', 4', 2' ±1 octave Sync mode select -∞ to unity gain Eurorack 90 mA (+12 V), 70 mA (-12 V) 81 x 129 x 46 mm (3.2 x 5.1 x 1.8") 16 HP 0.2 kg (0.44 lbs) LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.