Behringer 172 PHASE SHIFTER/DELAY/LFO Quick Start Guide - Page 2

Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Specifications Inputs Phase shifter signal input Type Impedance Max input level Phase shifter CV input Type Impedance Max input level CV range Audio delay signal input Type Impedance Max input level Audio delay CV input Type Impedance Max input level CV range Gate input Type Impedance Max input level CV range Outputs Phase shifter signal output Type Impedance Max output level 3.5 mm TS jack, AC coupled 70 kΩ, unbalanced +16 dBu 3.5 mm TS jack, DC coupled >50 kΩ, unbalanced +10 V 0 V to +10 V 3.5 mm TS jack, AC coupled 15 kΩ, unbalanced +20 dBu 3.5 mm TS jack, DC coupled >70 kΩ, unbalanced +10 V 0 V to +10 V 3.5 mm TS jack, DC coupled 47 kΩ, unbalanced +10 V 0 V to +10 V 3.5 mm TS jack, DC coupled 1 kΩ, unbalanced +18 dBu Audio delay signal output Type Impedance Max output level LFO output Type Impedance Max output level Gate output Type Impedance Max output level Controls Phase shifter effect switch Phase shifter mod intensity Phase Shift frequency Phase shifter resonance Audio delay effect switch Audio delay mod intesity Audio delay time Audio delay resonance LFO frequency Gate Threshold Gate delay time Gate time Power Power supply Current draw Physical Dimensions Rack units Weight 3.5 mm TS jack, DC coupled 1 kΩ, unbalanced +16 dBu 2 x 3.5 mm TS jacks, DC coupled 1.2 kΩ 10 V p-p 3.5 mm TS jack, DC coupled 500 Ω +5 V Off / on -∞ to unity gain 200 Hz to 8 kHz Off to maximum resonance Off / on -∞ to unity gain 1 ms to 7 ms Off to maximum resonance 0.02 Hz to 10 Hz 0.3 V to 5 V 0.3 ms to 6 s 0.3 ms to 6 s Eurorack 60 mA (+12 V), 60 mA (-12 V) 44 x 81 x 129 mm (1.7 x 3.2 x 5.1") 16 HP 0.19 kg (0.42 lbs) LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.