Behringer 305 EQ/MIXER/OUTPUT Quick Start Guide - Page 2

2. Insert the 16-pin connector on the power cable into the socket on the power supply or rack case. The connector has a tab that will align with the gap in the socket, so it cannot be inserted incorrectly. If the power supply does not have a keyed socket, be sure to orient pin 1 (-12 V) with the red stripe on the cable. 3. Insert the 10-pin connector into the socket on the back of the module. The connector has a tab that will align with the socket for correct orientation. 4. After both ends of the power cable have been securely attached, you may mount the module in a case and turn on the power supply. Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Specifications Inputs EQ input Type 3.5 mm TS jack, AC coupled Impedance 40 kΩ, unbalanced Max input level +18 dBu Mixer input Type 4 x 3.5 mm TS jacks, AC coupled Impedance > 25 kΩ, unbalanced Max input level Outputs EQ output +21 dBu Type 2 x 3.5 mm TS jacks, DC coupled Impedance 330 Ω, unbalanced Max output level +18 dBu Noise with EQ set flat < -90 dBu, 22 Hz to 22 kHz Master output Type 2 x 3.5 mm TS jacks 2 x 1/4" TS jacks AC coupled Impedance Max output level Noise with 1 channel open Phones output Type Impedance Max output level Controls EQ level EQ bandwidth Q range EQ frequency range 1 EQ frequency range 2 EQ frequency range 3 EQ frequency range 4 EQ bypass switch OSC frequency switch OSC mix level Mixer input fader Mixer panpot Master volume Phones level Power Power supply Current draw Physical Dimensions Rack units Weight 700 Ω, unbalanced +8 dBu < -100 dBu, 22 Hz - 22 kHz 3.5 mm TRS stereo jack, AC coupled 50 Ω, unbalanced +18 dBu ±12 dB, 0 dB center detent 0.9 to 9 20 Hz to 200 Hz 100 Hz to 1 kHz 500 Hz to 5 kHz 2 kHz to 20 kHz Off / on Off / 220 Hz / 440 Hz / 880 Hz -∞ to unity gain -∞ to unity gain -∞ to unity gain, -3 dB center detent -∞ to -10 dBu -∞ to +10 dBu Eurorack 120 mA (+12 V), 100 mA (-12 V) 53 x 122 x 129 mm (2.1 x 4.8 x 5.1") 24 HP 0.28 kg (0.62 lbs) LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.