Behringer EURODESK SX2442FX Brochure - Page 7

EURODESK SX2442 FX SEND 1 and 2 can be routed to an external effects device Master AUX SENDs 1 & 2 to external effects devices or monitor speakers The MONO Out. Perfect for a subwoofer output SUBGROUP outputs 9-band stereo equalizer. Use to adapt the sound to room acoustics or with the FBQ system MAIN/AUX 1 switch selects source of the signal to be processed by the FX section 99 24-bit studioquality digital effects including reverbs, delays, gates, phasers etc Master FX 1 & 2 SEND controls FX 1 & 2 effects level and selection controls CD/TAPE level control. Between sets press STANDBY to mute all active channels except the music you're playing through the CD/ TAPE input - so you don't have to change the levels of any channel faders! 60mm SUBmix bus faders 1, 2, 3 & 4. Each as a solo switch and switch to assign them to master Left or Right stereo channels Page 7 of 8 Gold-plated CD/TAPE OUTPUT RCA connectors for output to USB interface/hard disk recorder or DAT Gold-plated CD/TAPE INPUT RCA connectors for connecting MP3 or CD players or other line-level sources MAIN INSERTs can be used to connect a dynamics processor or equalizer for further processing of the mix signal Balanced/ unbalanced ¼" TRS MAIN outputs Balanced XLR MAIN outputs FOOTSW(ITCH) jack for enabling/ disabling FX 1 or FX 2 effects processors ¼" TRS PHONES/ CTRL ROOM OUT connector FBQ Feedback Detection System Frequencies causing feedback are indicated by the brightly-lit fader LEDs Graphic EQ IN / out FX LED level meters for optimizing input signal level to digital effects Switches assign internal effects to MAIN bus or subgroups 1-2 or 3-4 11-LED master level meter The SOLO/PFL switch determines whether the monitored signal is pre- or post-fader TALKBACK level control (can also be assigned to AUX 1/2) MONO output frequency control and separate LOW PASS filter PHONES/CONTROL ROOM level control and assignment switches 60mm mono out and main stereo out faders