Behringer FBQ100 Manual - Page 9

9 SHARK FBQ100 User Manual Unbalanced ¼" TS connector strain relief clamp sleeve tip sleeve (ground/shield) tip (signal) Balanced ¼" TRS connector strain relief clamp sleeve ring tip 4. Specifications Audio Inputs Connectors Impedance Nominal operating level Max. input level XLR and ¼" TRS jack 6 kΩ balanced, 3 kΩ unbalanced Microphone or line level source (switchable) +19 dBu at microphone level and line level Audio Outputs Connectors Impedance Nominal operating level Max. output level XLR and ¼" jack 60 Ω balanced, 30 Ω unbalanced Microphone level source or +4 dBu (switchable) +20 dBu at +4 dBu nominal level, -12 dBu at microphone level sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Balanced use with XLR connectors 21 3 input 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) 12 3 output For unbalanced use, pin 1 and pin 3 have to be bridged Fig. 3.2: Different plug types ◊ Please ensure that only qualified persons install and operate the SHARK. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the SHARK! System Specifications Frequency response Noise THD 10 Hz to 21 kHz > 92 dB at line level, unweighted, 22 Hz to 22 kHz > 89 dB at microphone level, unweighted, 22 Hz to 22 kHz 0.007% typ. @ +4 dBu, 1 kHz, gain 1 Digital Processing Converters 24-bit Sigma-Delta, 64/128-times oversampling Display Type 4-digit numeric LED display Power Supply Mains Voltages/Power Consumption USA/Canada 120 V~ 60 Hz 19 W U.K./Australia 240 V~ 50 Hz 20.5 W Europe 230 V~ 50 Hz 20 W Korea 220 V~ 50 Hz 20 W China 220 V~ 50 Hz 20 W Japan 100 V~ 50/60 Hz 18 W Physical Dimensions (H x W x D) Net Weight approx. 2.2 x 3.5 x 5.2" / 56 x 88 x 132 mm approx. 0.84 lbs / 0.38 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.