Behringer NOX1010 Brochure - Page 11
CUE MIX knob
View all Behringer NOX1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Page 11 of 20 NOX1010/NOX606 NOX404/NOX303 NOX202 NOX606 Top Panel TALKOVER automatically lowers music volume when mic is used, up position engages talkover function, down activates mic without lowering music BPF button engages band-pass filter, allowing only narrow band of frequencies selected by FREQUENCY knob to be heard LPF button engages the lowpass filter, allowing only frequencies below FREQUENCY knob setting to be heard CHANNEL FADER controls volume of channel in overall mix ON/PEAK LED green indicates channel is activate, red for signal overload HPF button engages high-pass filter, allowing only frequencies above FREQUENCY knob setting to be heard FILTER switch sends channel signal to FILTER 1 or 2, bypass in center position VCF TO XFADER button allows crossfader to control filter FREQUENCY function VCF LINK 2-1 allows FILTER 2 to be controlled by FILTER 1, allowing both filters to be adjusted simultaneously RESONANCE knob sets sharpness of filter, ranging from MILD (smooth response) to WILD (resonant feedback boost) MUTE button mutes BOOTH output CUE ACTIVE LED lights when channel CUE button is active POST EQ button selects whether cue is pre (up) or post-EQ (down) SPLIT/BLEND (CUE) button allows combining cue and program sources or splitting into left (cue) and right (main) CUE MIX knob allows gradual blend between cue and program signal CUE GAIN knob determines cue volume FILTER ON button FREQUENCY knob selects frequency used by variable cutoff filter XFADE (A OFF CROSSFADER B) switch sends fades between channel to sources either side of assigned to crossfader, OFF either side position bypasses crossfader and is heard in main mix XFADE CURVE knob adjusts fade steepness between source A and B AUX 1/2 switches send selected AUX RETURN signals to cue mix